fbpx ...

What Does House Waterproofing Mean and When Should it Be Done

If your house is damp enough, this will most likely lead to the appearance of mold. And she, as a consequence – to health problems. Therefore, you should not ignore the fact of its appearance but deal with it as soon as possible.

Constant sewage that enters the house can damage it. And the damage can happen when you least expect it. And as a result – receiving bodily injuries of various complexity.

To avoid unwanted consequences, you should familiarize yourself with waterproofing in more detail. It is important in any part of the house. From the very base – the foundation, to the covering – the roof. Modern methods allow you to protect your home from the water! More details in this article.

Even at the stages of construction, it is worth allocating more time to the issue of waterproofing. Let’s talk about it.

Advantages Of Waterproofing

The waterproofing of the outside of your house makes it possible to make it protected, regardless of weather conditions.

Our specialists highlight the following advantages of installing waterproofing. Here you can see the advantages of waterproofing:

  1. Absorption by the water surface is greatly reduced.
  2. Does not form a crack in the walls and floor.
  3. The building will last longer to fulfill the necessary needs.
  4. All parts are automatically protected against corrosion.
  5. No dampness inside.
  6. The roof of the building does not leak.
  7. Saving money.
  8. If you want to sell the building, you can do it for a higher price.
  9. A favorable internal environment and a sense of comfort.

7 Ways To Waterproof Your Home

Our experts have developed certain tips that must be followed even at the stage of construction or repair. Listening to them will save you time, money, and most importantly – nerves. Also, as previously reported, this will significantly increase the cost of your accommodation.

1. Foundations

Although it seems that concrete is a strong material that is not afraid of anything, it is not so. Water can cause its destruction. Since it is a porous material, water penetrates it without problems.

However, there is a solution to this problem. It is a membrane with holes that prevents direct contact with groundwater and the wall while creating a protective barrier and providing a place for air to penetrate.

You can also protect the walls with the help of a sealant.

2. Exterior Walls

It will also not be superfluous to mix concrete with other waterproof elements from the outside. To provide additional protection, it will be possible to cover the inner walls with polyethylene sheets. That’s what they do in new buildings. Older buildings do not have this protection. However, the paint with which they are covered from the outside on concrete or stone can already be waterproof.

3. Building Flashings

At the beginning of construction work, and preferably at the design stage, it is important to agree on the issue of protecting the building from water. To make it this way, talk to the contractor in advance if you can extend the sheathing and reduce it in the right place to provide protection inside the walls themselves.

It is also very important to check every gap between the bricks in the window area. It is important that the water flows outward, not inward. You can use a water hose to check. This will make it easier to control the situation.

Errors in the laying of cladding can be expensive in the future. Give it enough attention.

4. Roof

The first thing that has direct contact with water is the roof of the building. It is important to make it protected from water penetration. Chimneys, ventilation, and antennas must also be reliably hidden from rainwater. However, don’t think that has made a perfect roof, following all the requirements, you will not have to do anything else. It is necessary to constantly check for tightness. Unfortunately, no one is safe from cracks. And any accident can cost you your life!

In order not to have problems with snow lying on the dacha or icicles in the winter, make sure that there is a barrier that will prevent them from penetrating into unwanted places.

5. Gutters And Drains

Drainage gutters and channels should be regularly maintained and cleaned of blockages. They can sink to the ground surface and form a pool that will flood your basement.

Another relevant problem is that the building can deform over time, and therefore the gutters can also move from the right place.

Gutters are not immune to corrosion. It will be necessary to paint the vehicle with some color or to replace it altogether.

Be sure to check exactly where and how the water gets.

6. Windows And Doors

Wooden doors and window frames can swell during rains and snowfalls. And as a result – moisture is not retained at all. Tan is used for doors made of such material. Door seals can serve as additional protection against moisture and unwanted drafts in your home.

Hermetic windows also guarantee you protection from moisture. If you ignore these tips, you will need to replace the doors and windows sooner, as it may seem at first glance.

Also, the heat in the house also depends on these factors.

Ventilation in the house also plays an important role, especially in places where it is difficult to ventilate. We are talking about a bathroom, a toilet, if it is located separately, a room for warehouses, etc. With excessive humidity, which is caused by insufficient fresh air entering inside, doors and windows can also blow away.

7. Internal Building Waterproofing

As it was mentioned in the article earlier, insufficient ventilation inside the room can cause the deformation of internal doors and windows. All because of excessive humidity, or direct entry of water into the room.

All these factors must be taken into account at the stage of planning the house.

When To Waterproof Your Home?

Having analyzed all the tips given above, it is worth noting that the issue of waterproofing your home is quite important. Discussed at the beginning of planning or construction. It is necessary to carefully inspect the premises for internal defects in order to strengthen them well and protect them from future ingress of water. Only then can you start decorating the house and furnishing the interior.

If you have additional questions, please contact us for more information. We are always happy to help you!

What we do?

  • check iconCLOGGED OR BROKEN WEEPING TILE
  • check iconWATER TABLE OR STREAM
  • check iconFOUNDATION WALL CRACK
  • check iconWINDOW WELL
  • check iconFLOOR WALL JOINT
  • check iconFLOOR DRAIN
  • check iconOVER TOP OF FOUNDATION WALL
  • check iconDOWN STACK / SEWER DRAIN
  • check iconSUMP PUMP AND WELL
  • check iconFLOOR CRACK
  • check iconFOUNDATION WALL SEEPAGE